What are the advantages of hydraulic press? There are mainly the following points

      Energy saving of hydraulic press: the equipment is controlled by servo-hydraulic control system, which saves about 70% electricity than traditional hydraulic press.

      Hydraulic press Environmental protection: the equipment has the characteristics of low noise and low oil temperature; the theoretical noise value of the standby equipment is 40-50dB; the theoretical noise value of the equipment operation is 60-70dB; the equipment has automatic oil temperature detection and automatic cooling function. The system can automatically open or close the air-cooling system according to the real-time oil temperature, which not only ensures energy saving, but also effectively cools the hydraulic oil, thus greatly improving the service life of the seals in the hydraulic system.

       High precision of hydraulic press: The equipment adopts double servo system of servo motor and servo pump, and the overall operation logic and data acquisition of the equipment are controlled by small PLC with Ethernet communication end from Mitsubishi Japan. The press force, stroke and press speed can be adjusted according to the actual requirements of the product pressed and formed. The repeat accuracy of the equipment pressure can be controlled within 1%, and the repeat positioning accuracy of the equipment heavy load position is within ±0.05mm.

      Low failure rate of hydraulic press:

      In terms of hardware of hydraulic press, all parts of the equipment are made of famous brand products, hydraulic seal is made of Japanese NOK, main low voltage electrical products are made of Schneider or Omron, PLC controller is made of Japanese Mitsubishi, main valve parts are made of Taiwan Northern Machinery, encoder is made of Omron, etc.;

      Hydraulic press in software, due to the high work intensity of hydraulic equipment, high temperature of hydraulic oil (the cause of hydraulic system failure), hydraulic system components seals easy to damage, oil leakage and other phenomena, the equipment of hydraulic equipment a lot of optimization work, hydraulic oil deterioration accelerated, hydraulic oil replacement cycle is short, production costs increase and other problems; new oil temperature detection and control system can be stable control of hydraulic oil temperature within the safe range .

      Hydraulic press safety:

      Hydraulic press equipment strictly conforms to safety standards. In addition to the two-hand start, the emergency stop device of the machine and the safety grille, we have redefined the safety in the procedure. When starting the machine, the operator must press the operating button with both hands at the same time within the specified time. Avoiding safety hazards for operators and improving operation efficiency. Emergency equipment can press the emergency button and the equipment immediately stops the alarm. Real-time monitoring of the protected area during the operation of the equipment forms an invisible safety gate. If someone invades the site, the machine will immediately stop the alarm, greatly improving the safety of the operator.