What is the difference between an oil press and a hydraulic press?
Release time:
2021-11-24
What is the difference between a hydraulic press and a hydraulic machine?
Hydraulic press and hydraulic machine sound similar. What is the difference between them? Some people call it a hydraulic press, while others call it a hydraulic machine. Often, people are not very clear about the distinction, and the following explains the difference between a hydraulic press and a hydraulic machine.
As the name suggests, a hydraulic press uses oil to generate power, while a hydraulic machine can be driven by oil or water, as water is also a liquid. There is also a type that uses a mixture of oil and gas, called an air-oil press, gas-oil press, or pressure bed. In fact, a hydraulic press is a type of hydraulic machine.
Hydraulic machine: A machine that uses liquid as a working medium, based on Pascal's principle, to transmit energy and achieve various processes. A hydraulic machine generally consists of three parts: the main machine (host), the power system, and the hydraulic control system. Hydraulic machines are classified into valve hydraulic machines, liquid hydraulic machines, and engineering hydraulic machines.
Hydraulic press (a type of hydraulic machine): A machine that uses special hydraulic oil as the working medium, with a hydraulic pump as the power source. The pump's force causes the hydraulic oil to enter the cylinder/piston through the hydraulic pipeline. The cylinder/piston contains several sets of cooperating seals; the seals in different positions are different but all play a sealing role to prevent hydraulic oil leakage. Then, through a one-way valve, the hydraulic oil circulates in the oil tank, causing the cylinder/piston to reciprocate and perform work, thus completing a certain mechanical action as a productive force.
Commonalities between hydraulic press and hydraulic machine:
1. Both have the same working principle.
The working principle is hydraulic transmission, which uses liquid pressure to transmit power and control.
2. Both have roughly the same overall structure.
Both consist of three parts: the main machine (host), the power system, and the hydraulic control system.
3. Both have roughly the same uses.
Both are widely used in the processing of auto parts and in various industries for shaping, trimming, correcting, and pressing various products, including shoes, handbags, rubber, molds, shafts, bushings, bending, stamping, and stretching of sheet metal parts, as well as in the manufacturing of washing machines, electric motors, automotive motors, air conditioning motors, micromotors, servo motors, wheels, shock absorbers, motorcycles, and machinery.
Recommended products
2023-05-12
What are the characteristics of a hydraulic press?
CNC hydraulic oil pumps generally use internal gear pumps, while traditional hydraulic presses generally use axial piston pumps. At the same flow rate and pressure, the noise of an internal gear pump is 5 dB to 10 dB lower than that of an axial piston pump. The motor of a CNC hydraulic press runs at rated speed during pressing and return, and its noise emission is 5 dB to 10 dB lower than that of a traditional hydraulic press. When the slider rapidly descends and is stationary, the servo motor speed is 0, so the CNC hydraulic press has essentially no noise emission.
2015-08-25
Application scope and system selection of small hydraulic presses
Suitable applications for small hydraulic presses include: 1. Punching various silicone and plastic buttons for mobile phones or remote controls, and cutting plastic products; 2. Cutting various protective films for mobile phones, digital cameras, and laptop LCD screens, as well as precision cutting and halving of various pressure-sensitive adhesives and trademarks; 3. Embossing, forming, etc., of various PV, PE, PC and other thin-film switches and panels; 4. Pressing and forming various flexible circuit lines for laptop keyboards, etc. Small hydraulic presses use original Taiwanese or Japanese parts for the hydraulic power system, resulting in fewer malfunctions, high efficiency, low noise, low horsepower requirements, easy maintenance, and convenient adjustment of output, speed, and stroke.
2014-04-29
Technology Daily (Reporter Shi Junbin, Correspondent Jiao Yue) Recently, a 19,500-ton free forging hydraulic press and a 300-ton/750-ton-meter full hydraulic forging manipulator, independently developed by China Heavy Industry Corporation, successfully completed their first hot load test run in Jiangyin, Jiangsu Province. This marks the completion of the world's largest tonnage free forging hydraulic press and the world's largest clamping force/clamping torque full hydraulic forging manipulator currently in operation, achieving a globally advanced level of overall equipment installation. The 19,500-ton free forging hydraulic press adopts a three-beam, four-column, three-cylinder, top-drive, press-insert, full pre-stressed frame structure. Both the upper and lower beams use pre-stressed composite beams. The maximum forging capacity can reach 4
Contact us
Address: No. 19, Science and Technology East Road, Songxia Industrial Park, Songgang, Nanhai District, Foshan City, Guangdong Province, China
Tel: 0086-0757-85203155
Mobile: 18033239126(Mr. Yang)
Fax: 0086-0757-85203166
Email: info@fs-hongdemachinery.com
Scan to follow
Xin Hongde Mobile Website
Quick Navigation
©2025 Foshan Xin Hongde Machinery Manufacturing Co., Ltd. All rights reserved