Operating Instructions and Maintenance of Hydraulic Presses in Guangdong
Release time:
2022-11-04
Guangdong Hydraulic Press It is a type of testing machine, mainly used to test the pressure of samples and understand the pressure range that the sample material can withstand. 。 Many people don't understand Guangdong Hydraulic Press especially the precautions for use, and don't know how to use it correctly. 。 Because if used incorrectly, Guangdong Hydraulic Press it will affect the measured data and accurate pressure data cannot be obtained. Guangdong Hydraulic Press Unlike other testing machines, it mainly uses the mechanical principles of physics to measure the pressure on the material. So, let's learn about Guangdong Hydraulic Press the usage and maintenance.
I. Guangdong Hydraulic Press Matters needing attention during use:
1. Material Selection
Before testing, not only the equipment but also the material selection should be taken seriously. Only by selecting suitable materials can accurate data be tested. Guangdong Hydraulic Press Materials are limited, mainly used for measuring metal and non-metal materials, need to pay attention to material selection.
2. Inspection Guangdong Hydraulic Press
Use Guangdong Hydraulic Press Before use, please pay attention to the inspection of the equipment. 。 After using the equipment, if the parts of the pressure testing machine are not in the standard position, or if there is a problem with the equipment parts, problems may occur during measurement.
3. Place the baseline correctly
Guangdong Hydraulic Press When measuring the sample, need pay attention to the standard curve to ensure the accuracy of the measurement. 。 If the baseline is not placed in the standard position, it will definitely affect the measurement.
4. Avoid adjustment
Guangdong Hydraulic Press Do not adjust arbitrarily during measurement. 。 Once the equipment is running, arbitrary adjustments may affect the measurement results of the equipment, and the equipment may malfunction, leading to unsuccessful testing. Please note that you should not arbitrarily adjust any part of the equipment.
II. Guangdong Hydraulic Press Quarterly Maintenance Plan:
1. As a high-tech testing equipment, different structures can be found in the pressure testing machine. 。 During quarterly maintenance, relevant personnel need to check each equipment structure accordingly to ensure that there are sufficient lubrication measures for the lubricated parts.
2 Guangdong Hydraulic Press The host part of also needs to be effectively checked to avoid problems such as abnormal noises during use. 。 In addition, the pressure testing machine has various buttons and control keys, so it is necessary to check them in the quarterly maintenance plan to confirm whether they can be flexibly controlled.
3. At present, pressure testing machines launched by different manufacturers are equipped with corresponding protection devices and equipment control systems. Need to check these two key points to ensure that the performance of the entire equipment is better protected.
4. Clean and maintain the blind spots, and check the relevant performance of the equipment to confirm whether it can be tested correctly.
5. Check whether the equipment cables and wires have aging or damage. If found, they should be replaced in time.
6 Guangdong Hydraulic Press There are many different fixing screws. Pay attention to whether the nuts in each part are loose or rusty. Once any part of the testing machine is found to have a problem, it needs to be replaced in time.
7 Guangdong Hydraulic Press The circuit should ensure a good grounding state, without any missing or damaged parts. 。 If there are any, in order not to affect the distortion of the later test data, need order and replace parts from the original manufacturer.
The above is an introduction to Guangdong Hydraulic Press the usage and maintenance. If you need to know more, please feel free to contact us. 'Our company has many years of experience and is always looking forward to your joining.'
Recommended products
2023-05-12
What are the characteristics of a hydraulic press?
CNC hydraulic oil pumps generally use internal gear pumps, while traditional hydraulic presses generally use axial piston pumps. At the same flow rate and pressure, the noise of an internal gear pump is 5 dB to 10 dB lower than that of an axial piston pump. The motor of a CNC hydraulic press runs at rated speed during pressing and return, and its noise emission is 5 dB to 10 dB lower than that of a traditional hydraulic press. When the slider rapidly descends and is stationary, the servo motor speed is 0, so the CNC hydraulic press has essentially no noise emission.
2015-08-25
Application scope and system selection of small hydraulic presses
Suitable applications for small hydraulic presses include: 1. Punching various silicone and plastic buttons for mobile phones or remote controls, and cutting plastic products; 2. Cutting various protective films for mobile phones, digital cameras, and laptop LCD screens, as well as precision cutting and halving of various pressure-sensitive adhesives and trademarks; 3. Embossing, forming, etc., of various PV, PE, PC and other thin-film switches and panels; 4. Pressing and forming various flexible circuit lines for laptop keyboards, etc. Small hydraulic presses use original Taiwanese or Japanese parts for the hydraulic power system, resulting in fewer malfunctions, high efficiency, low noise, low horsepower requirements, easy maintenance, and convenient adjustment of output, speed, and stroke.
2014-04-29
Technology Daily (Reporter Shi Junbin, Correspondent Jiao Yue) Recently, a 19,500-ton free forging hydraulic press and a 300-ton/750-ton-meter full hydraulic forging manipulator, independently developed by China Heavy Industry Corporation, successfully completed their first hot load test run in Jiangyin, Jiangsu Province. This marks the completion of the world's largest tonnage free forging hydraulic press and the world's largest clamping force/clamping torque full hydraulic forging manipulator currently in operation, achieving a globally advanced level of overall equipment installation. The 19,500-ton free forging hydraulic press adopts a three-beam, four-column, three-cylinder, top-drive, press-insert, full pre-stressed frame structure. Both the upper and lower beams use pre-stressed composite beams. The maximum forging capacity can reach 4
Contact us
Address: No. 19, Science and Technology East Road, Songxia Industrial Park, Songgang, Nanhai District, Foshan City, Guangdong Province, China
Tel: 0086-0757-85203155
Mobile: 18033239126(Mr. Yang)
Fax: 0086-0757-85203166
Email: info@fs-hongdemachinery.com
Scan to follow
Xin Hongde Mobile Website
Quick Navigation
©2025 Foshan Xin Hongde Machinery Manufacturing Co., Ltd. All rights reserved